Latch Opening Card Double-Offset Doors (black) 0.50 mm

The Spiral Opener Set is a highly effective tool designed for non-destructive entry on both single and double rebate doors. Featuring an innovative spiral wire made from high-quality spring steel, it allows for smooth and efficient operation in many situations.Using the tool is simple. The spiral wire is inserted through the narrow gap between the door and frame and turned until it engages with the latch. As it continues to turn, the latch is pushed back, allowing the door to open. In most cases, this process leaves no damage to the door or frame, apart from a minor perforation in the gasket.This professional-grade set includes two specially shaped spiral wires, designed for both left- and right-hinged doors. With a durable 1.7 mm material thickness, they are suitable for various door frames and are particularly effective for double rebate doors. The set provides a fast, efficient, and damage-free solution, making it an essential tool for locksmiths and emergency responders. 

Important: This tool does not open locks with anti-pick system! Since this decoder is designed for double-bit lever lock Arfe safe 3x3 pins, its construction is accordingly. The pick consists of a rod with 3x3 pins. These pins are arranged in a specific order to match the intended lock. The pins are tightened in the back part of the handle by a pin manipulator. When this is tight, the pins will be difficult to move. If it is loose, the pins can be moved more easily. Preparation You take one of the two springs and put it into the slot in the front of the handle. Afterwards remove the cover of the housing (which is on the back). Then insert the rod into the handle as demonstrated in the video, and securely tighten it to the handle with the Allen key and insert the pin manipulator by screwing it into the back of the handle. The ease of movement of the pins is the most important thing. If they are tight, the opening process will not be successful! Lastly, mount the small tensioning handles. Now the decoder is ready for use. Opening and repairing procedure with the double-bit lock decoder Make sure that the decoder is used for the appropriate lock. Insert the tool with the pins that correspond to the position of the levers inside the lock. Now start the opening procedure. By tensioning it over the tensioning handles several times, the decoder raises each tumbler to a certain height so that the bolt can move. Finally, the pins "adopt" the position corresponding to the position of the "ridges" of the original key. Moreover, the double-bit lock decoder is easy to assemble and disassemble. Another important aspect is the ease of repairing a broken or twisted pin - simply unscrew the pin manipulator and replace the damaged pin. This lockpick tool works in a non-destructive way. Each tool can be used for a specific lock - in this case Arfe safe 3x3 or for locks with similar dimensions. The internal dimensions of the locks (the size of the original key) are crucial. This means that you have to know the number of levers and the distance between the levers before using a lockpick tool. 

The popular panic door opener is now available as a set for door opening right and left. No difficult operation anymore thanks to the coverage of all opening directions. Practical and effective! For the opening of closed doors that open to the outside, single-offset doors, i.e. those that can be found in public buildings and emergency exits. In order to insert the tool into the gap between frame and door it is often necessary to broaden this gap using a suction cup or our Multi-Opener. Depending on the door, this application can require different techniques therefore it’s advisable to be prepared for all possibilities! Extending the door gap can accomplished e.g. with a strong siphon, door wedges or a door lever.Special:Spring steel blade, only 1mm thick. Also available individually33800 = Door use from the top right33805 = Door use from the top left  

Kronos (Master Key) Electric Lock Pick Gun - The electric lock pick for a bargain price from Multipick We have gathered all our experiences from the development of the MHP II and invested it in KRONOS. The result is an electric lock pick that does not need to be hidden away behind its big brother. KRONOS provides state-of-the-art electronics with a powerful motor. Further, we were able to gain one of the largest German manufacturers of DC motors and involve them in the development. During our endurance tests KRONOS has impressively proven all its power. Today we are able to present you an electric pick with cutting-edge technology. Due to its improved motor and low natural vibration, KRONOS is one of the quietest (if not THE quietest) e-picks offered worldwide. A real plus if you still need to open a cylinder at four in the morning.Thanks to its new power management, you will be able to achieve a continuous load of more than two hours. That’s enough to unlock a vast number of cylinders. Charging has never been so easy!Simply connect the included USB cable to a power supply, car cigarette lighter port or computer and charge KRONOS. That messy jumble of different cables is now history. One cable, many possibilities - that´s how it works nowadays. If necessary, please order the charger separately.We also supply the Kronos storage & carrying case (Prod.No.: 12570) as an accessory. The Kronos EPG is safely protected by the cut-out soft foam insert, and the case also offers space for a circular tension ring and the original Flip-It plug spinner.By the way, the included pick needles are made from the exact same, ingenious material as our ELITE picks.Technical specifications:Li-Ion battery 3.7 V / 2900 mAh  Needle deflection precisely adjustable from 1 to 4 mm at the needle chuckIdle speed 13,000 rev/minWeight with battery - approx. 350gDimensions: D=34 mm L=205 mmBattery life approx. 2.5 hours 

The 2 piece key turner set gives you the opportunity of opening warded locks (e.g. room doors) where the key is still inserted on the other side. Depending on the directions in which the lock has to be opened, one of the appropriate key turners must be selected. It's a very helpful tool, especially in combination with our lever picks.