Otoscopes allow users to view and inspect narrow and restricted spaces, normally difficult or impossible to reach. The tool illuminates the area that is to be inspected brightly and magnifies it at the same time. Professionals in the Locksmith trade can, for example, inspect the interior parts of locks and cylinders in order to identify damages, blocking objects, etc. Pen-Otoskop 1A small, state-of-the-art otoscope with plastic body, colour: black, very bright halogen illumination 2.5 volts. Our recommendation! The small size of the tool allows carrying it in a pocket. Otoscope:Fibre-OpticsMagnifies x 2.5 Battery handle for 2 batteries type AAThe otoscope includes 2 cones each of diameters 2.5 and 4.0 mm ØDelivery in a modern hard-cover plastic case   Our range of otoscopes are high quality products made in Germany and carry a 2 year guarantee. Delivery will be in black colour and without batteries! 

For tight, difficult to access areas which can not be reached by pointed pliers,we recommend the chrome-plated nose pliers with 40° bent jaws, polished head andhandles with multi-component covers.  

Knipex Long Flat Pliers 

  

This 4-piece drill and mill auxiliary key set is an aid for targeted and efficient destructive opening of profile cylinder locks. It enables precise cutting of the core pin row in the cylinder housing by drilling or milling. The set makes the opening process considerably easier, especially for cylinders that are secured with hard driver pins.The drill and mill auxiliary key is inserted into the keyway of the profile cylinder. This pushes the cylinder core pins into the cylinder housing. A drill or milling cutter is then used to drill directly below the cylinder core in order to cut through the row of pins. Depending on the cylinder, the drilling depth is roughly 2.5 cm so that all pins in the core can be cut through. Once the milling or drilling has been completed, the tool should be held in the keyway to prevent the pins from moving and to prevent the cylinder core from jamming again. Afterwards, turn the key stump in the opening direction with the aid of a pair of pliers so that the auxiliary drill key can act as a key and open the cylinder.The thin key blanks fit into most standard profiles and cover around 90 % of common cylinders.This set is particularly practical as it not only makes the milling or drilling process easier, but also allows the key blank to be used directly to open the cylinder after milling. It is an essential tool for professionals who regularly have to open cylinders, including those that are particularly resistant. 

This practical tool enables you to remove pins, springs and fragment residues from the milling or drilling passage. 

Fine, high quality spring steel with aluminium handle to push the cylinder coupling in and to carry on the cam if the picked plug is spinning. Suitable as well for manipulation as for destructive openings (drilling).   

The auxiliary milling key is designed to address malfunctions that occur after the milling process.For cylinders with emergency and danger functions, the cam coupling is held in place by pressing the auxiliary milling key into the center of the cylinder while turning it. If the coupling becomes stuck, a light tap with a hammer can help release it.For standard cylinders, vibrations during the milling process may cause the coupling to shift forward. To resolve this, hold the keyway in a vertical position and use the auxiliary milling key to push the coupling inward, allowing the cam to rotate freely.If a key is lodged inside the cylinder, use a 1 mm pointed spring steel wire, such as our Coupling Actuator (SKU: 3138), which can be purchased separately. Press the wire against the edge of the core while simultaneously turning the auxiliary milling key to move the cam. 

The Multipick magnetic lifter is characterised by its versatility. Thanks to its telescopic design, the magnetic staff can be extended from a compact length of 11.5 cm up to 50 cm for flexibility.It is made of high-quality chrome-plated metal and is fitted with a strong magnet at its tip to draw ferromagnetic metal pieces out of a cylinder or a broken or milled cylinder, as well as to remove small pieces of metal residue from the cylinder receptacle after use with our V-Pro extraction screws.The corrosion-resistant and durable material ensures a long service life. A practical feature is the integrated pocket clip, which makes the magnetic lifter to be transported easily. This means it can be comfortably taken along with you for any job, especially at the customer's premises.