Carbide-Drill 5,5 x 85 mm

The latch opening cards are made from a type of plastic specifically created for their use. They allow a fast and easy opening of doors that are “only” closed, but not locked. Especially in cases where the gap between door and frame is too narrow for the use of latch pick needles these cards can prove their usefulness. 

Important: This tool does not open locks with anti-pick system! Since this decoder is designed for double-bit lever lock Cisa/Gevy 3x3, its construction is accordingly. The pick consists of a rod with 3x3 pins. These pins are arranged in a specific order to match the intended lock. The pins are tightened in the back part of the handle by a pin manipulator. When this is tight, the pins will be difficult to move. If it is loose, the pins can be moved more easily. Preparation You take one of the two springs and put it into the slot in the front of the handle. Afterwards remove the cover of the housing (which is on the back). Then insert the rod into the handle as demonstrated in the video, and securely tighten it to the handle with the Allen key and insert the pin manipulator by screwing it into the back of the handle. The ease of movement of the pins is the most important thing. If they are tight, the opening process will not be successful! Lastly, mount the small tensioning handles. Now the decoder is ready for use. Opening and repairing procedure with the double-bit lock decoder Make sure that the decoder is used for the appropriate lock. Insert the tool with the pins that correspond to the position of the levers inside the lock. Now start the opening procedure. By tensioning it over the tensioning handles several times, the decoder raises each tumbler to a certain height so that the bolt can move. Finally, the pins "adopt" the position corresponding to the position of the "ridges" of the original key. Moreover, the double-bit lock decoder is easy to assemble and disassemble. Another important aspect is the ease of repairing a broken or twisted pin - simply unscrew the pin manipulator and replace the damaged pin. This lockpick tool works in a non-destructive way. Each tool can be used for a specific lock - in this case Cisa/Gevy 3x3 or for locks with similar dimensions. The internal dimensions of the locks (the size of the original key) are crucial. This means that you have to know the number of levers and the distance between the levers before using a lockpick tool. 

Hard Metal Drills with Carbide - Cone PointApplicable for all standard-uses in the locksmith field. The prizes refer respectively to a piece.Shank Diameter: 6,0 x 100 mm  

Hard Metal Drills with Carbide - Cone PointApplicable for all standard-uses in the locksmith field. The prizes refer respectively to a piece.Shank Diameter: 10,0 x 120 mm  

The (in our opinion) perfect Door Latch Slider The latch opening slider “TFG” completes our selection of tools for the opening of closed but unlocked doors . We are absolutely enthusiastic about the tool’s effectiveness and quality and use the "TFG" on an almost daily basis ourselves. The "TFG" comes in 5 different sizes: 15, 20, 25, 30 & 35 mm, each size optimized for the different types of offset door designs. Experience tells us that there is no better tool for the simple opening of closed but unlocked doors. Put this to the test yourself! The use is incredibly easy! Insert the "TFG" in the gap between door and frame, slide it down to the latch and the door opens.It is made out of highly flexible spring steel and is only as thick as 0.8 mm. The "TFG" can be used effectively almost everywhere. The "TFG" has no sharp edges, and does not cause scratches or other damages on the door or the frame. If the sliding of the "TFG" is made difficult by the sealing strip, lubrication of the "TFG" is very effective.The door latch slider “TFG” is highly flexible but still strong and almost indestructible. Only 0.8 mm thick! Without sharp edges.